Denne varen finnes ikke lenger i vårt sortiment, men kontakt oss gjerne på post@tromsoskiogsykkel.no - så hjelper vi deg finne et alternativt produkt til dette.

Spark R&D Arc Splitboard Binding

Spark R&D Arc Splitboard Binding
Varenr.
WEBB2301617
Lager
Velg varians
Pris
Fra kr 4 490,00
Før
kr 5 499,00

Kvantumsrabatt

Loading...
  • Spark R&D Arc Splitboard Binding
  • Spark R&D Arc Splitboard Binding - Arc-Black-Profile-1
  • Spark R&D Arc Splitboard Binding - Arc-Black-Rear-1
  • Spark R&D Arc Splitboard Binding - Arc-Black-Wires
  • Sizing-Mens_Binding_Sizing
  • Spark R&D Arc Splitboard Binding - One-Climbing-Wire-1
  • Spark R&D Arc Splitboard Binding - Touring-Bracket-2
  • Spark R&D Arc Splitboard Binding - Rip-N-Flip-1
  • Spark R&D Arc Splitboard Binding - T1-Heel-Rest-1
  • Spark R&D Arc Splitboard Binding - Buckles-and-Straps
  • Spark R&D Arc Splitboard Binding - Puck-Compatibility
The Arc is coming in hot for its second season as the most popular splitboard binding on the market and again features our Tesla T1 System. This is our lightweight, pow chasing model - maximum cutouts in the baseplate shave weight while maintaining the strength and performance needed in the backcountry. Perfect for long tours, epic overnighters, trees and steeps – these bindings can do it all.
In the Box: Bindings, Tesla touring brackets, Tesla T1 heel rests, mounting screws, and Spark pocket tool.
What else do I need? A set of Spark or Voile pucks.
Weight: 1.50lb/ea (681g) - 3.00lb/pr (1362g) – Medium

One Climbing Wire
T1 stands for One Wire – because that’s all you need. A single fatty wire built into the baseplate switches easily from stowed, to low (12°), to high (18°) climbing positions and back again while touring. For even easier deployment, check out the Whammy Bar.

Snap Ramps & Side-Lock Touring Brackets
T1 System bindings slide sideways into the offset touring bracket and are locked into place with our snap ramp. No pins, no cables, no fiddle factor. Integrated Ibex crampon mounting claws on touring brackets make for quick and easy installation and removal.

Rip 'N' Flip Highback
The R&D shines with a shape built from 3D scans of popular splitboard boot models, and a list of rad features designed specifically for and fully appreciated by the splitboarder. Increased glass fiber content for improved strength and response, yet 30% lighter than our classic highbacks. Tool free forward lean adjuster (FLAD) offers complete customization from 0° to 22° in ride mode. The Forward Lean Adjuster toggles easily between forward lean position and -13° touring position for easy transitions.

T1 Heel Rest
The T1 Heel Rest catches the climbing wire in the 12° and 18° positions and is specifically designed to hold the T1 Heel Locker in place.

Buckles, Straps, & Plastics
Low profile, comfortable and bomber Burton straps and buckles paired with our plastics. Now produced in-house with a unique thermoplastic that maintains flex over wide temperature variation, our plastics perform well on spring tours as well as sub-zero suffer fests.

Puck Compatibility
Slide them on and snap the ramp down. Snap the ramp up and slide them off. The most functional way to attach your binding to your board in ride mode. Period. Spark R&D bindings are designed to work with all puck compatible splitboard models.

Replacement products

Relaterte varer

Din nettleser er utdatert!

For å kunne bruke alle funksjoner på nettsiden må du oppdatere nettleseren. Oppdater min nettleser nå

×