Vauhti Block Fc Ldr +5/-20C 20g

Vauhti Block Fc Ldr +5/-20C 20g

Vauhti

Varenr.
1987181
Lager:
På lager
Pris:
kr 1 199 Eks. MVA

Bestilte varer sendes med Posten eller PostNord
Gratis frakt på ordre over 1500,- 
Standard frakt er 99,-
Hjemlevering 299,-
Sendinger til Svalbard 299,-
*Sykler 750,-
Elsykler 1500,-
Alle Trek sykler må hentes i butikk

Pakken blir som regel postlagt innen 24t etter at vi har mottatt din bestilling - så sant vi har varene på lager. Pakken vil være fremme hos mottakeren innen 2-5 virkedager, avhengig av hvor i landet du bor.

Vi tilbyr gratis montering ved kjøp av ski & binding. Husk å oppgi sålelengde (mm) & vekt (kg).

Med Klarna kan du delbetale mellom 3 og 36 måneder.

Kvantumsrabatt

Loading...
FC blocks are based on the corresponding fluorocarbon powders. FC blocks can be used on top of quick glides, base waxes, fluorinated waxes or fluorocarbon powders. Apply into the base with either an iron or cork.
  • All snow types, especially in old and man-made snow from cold to humid conditions.
  • Excellent block for all kinds of general use, whatever the conditions or distances.
  • Suitable for recreational skiers and juniors as all-purpose block to be used through winter.
  • A good choice to mix with quick glides as a block porridge.


    Instructions:

  • Clean the ski base thoroughly with Vauhti Clean&Glide cleaning and maintenance agent.
  • Use solid wax or liquid quick glide suitable for the snow type and humidity as the base wax.
  • Scrape and brush the base wax layer carefully, start with roster or brass brush and polish with nylon brush.
  • Apply some product onto the glide surfaces; adhere by roto cork or by natural cork.
  • Let the skis cool down and scrape lightly
  • Start brushing with a few roster brush strokes and brush thoroughly with a nylon brush.
  • When using roto brushes brush thoroughly with roto nylon if required use horsehair roto brush first.
  • If the snow is wet, after nylon brushing, finalise slightly by fine roster brush or horsehair brush (matt surface improves hydrophobicity).
  • In case of longer distances, iron the bottom layer slightly, cool down the skis, scrape carefully, brush the glide surfaces, add another layer, adhere it by cold rubbing, and brush as above.


    • Din nettleser er utdatert!

      For å kunne bruke alle funksjoner på nettsiden må du oppdatere nettleseren. Oppdater min nettleser nå

      ×