Vauhti Quick Glide Hf Mid +5/-8C 80ml

Vauhti Quick Glide Hf Mid +5/-8C 80ml

Vauhti

Varenr.
1985279
Lager:
På lager
Pris:
kr 319 Eks. MVA

*Alle sykler må hentes i butikk
Bestilte varer sendes med Posten.
Gratis frakt på ordre over 1500,- 
Standard frakt er 99,-
Hjemlevering 299,-
Sendinger til Svalbard 299,-

Pakken blir som regel postlagt innen 24t etter at vi har mottatt din bestilling - så sant vi har varene på lager. Pakken vil være fremme hos mottakeren innen 2-5 virkedager, avhengig av hvor i landet du bor.

Vi tilbyr gratis montering ved kjøp av ski & binding. Husk å oppgi sålelengde (mm) & vekt (kg).

Med Klarna kan du delbetale mellom 3 og 36 måneder.

Kvantumsrabatt

Loading...
A special product for new and damp snow. Recommended operating range: at less than 75% humidity, 0/-3°C; at humidity over 75%, -1/-5°C.
The series is intended specifically for competitive skiers and demanding fitness skiers. High fluorocarbon content provides for supreme water and dirt repellence. The entire line is suitable for all snow types, if the air humidity is over 55% and snow is humid or wet. The content of these products is the same as their predecessor Vauhti HF-gliders.


Tips to improve the durability and glide sensitivity:

Tip 1. Attach the dried product by rubbing with natural cork, you can also use a cork roller (= Roto cork). Using cork will significantly improve the product’s durability. Brush the ski base thoroughly with a nylon brush; if necessary, use a fine-bristled metal brush first.
Tip 2. Add Vauhti Fluorocarbon Block on ski base waxed with Liquid Glide. Rub with natural cork or Roto cork, and brush thoroughly, using a nylon brush. The glide sensitivity of the ski will increase significantly.
Tip 3. Rub a layer of Vauhti Fluorocarbon Block on the base, and apply a generous amount of liquid glide on top of this layer, mixing the two products into one ”porridge”. Let dry completely; the longer, the better. Brush heavily, using a nylon brush. You can also extend durability by rubbing the “porridge” with a natural cork or a cork roller. Brush thoroughly with a nylon brush; if necessary, use a fine-bristled metal brush first.


    Din nettleser er utdatert!

    For å kunne bruke alle funksjoner på nettsiden må du oppdatere nettleseren. Oppdater min nettleser nå

    ×